Mobility Scooter Chargers

Wake Up to a Mobility Device That's Ready to Roll

A drained power chair or scooter battery steals independence. This collection of 24V mobility scooter and electric wheelchair chargers from VMAX and Victron Energy puts a full, healthy charge back in the pack overnight—then holds it there without cooking the cells. Plug in after the last trip of the day and start the next one with the range and torque your chair was built to deliver.

Every charger here is a smart maintainer, not a crude wall wart. Multi-stage charging brings AGM, gel, and flooded banks up safely, then switches to float so you can leave the unit connected. Need lithium support and faster recovery? Step up to the Victron 8A XLR charger and watch the pack come back in a fraction of the time.

Protect the Batteries That Keep You Moving

The wrong charger shortens battery life and leaves you stranded. These units read the pack, apply the right current at each stage, and stop overcharging automatically so your investment lasts longer and your device stays reliable.

• Automatic multi-stage charging — VMAX 3A models use four stages (repair, bulk, absorption, and float) to recover sulfated cells and finish with a gentle maintenance charge.
• No overcharge risk — Leave the charger connected between trips. Maintenance mode keeps voltage in a safe window instead of boiling the pack.
• Chemistry-matched profiles — Charge flooded, AGM, and gel batteries with confidence. The Victron 24V 8A unit also programs lithium and LiFePO4 packs, including a BMS reset for batteries that have shut down on low voltage.
• Faster turnaround when you need it — The 8A Victron Blue Smart charger restores larger banks quicker than a 3A maintainer, with silent, high-efficiency operation and no cooling fan.
• Live control from your phone — Bluetooth on the Victron charger opens the VictronConnect app so you can check status, pick a profile, and confirm a full charge before you unplug.

Connect the Way Your Chair Is Wired

Factory ports and aftermarket batteries do not always use the same plug. This category covers the connections mobility owners actually use:

• 3-pin XLR chargers — VMAX BC2403XM and Victron 24V 8A units plug straight into the charging port found on many power chairs and mobility scooters.
• Ring-terminal chargers — The VMAX BC2403RT lands on battery posts when you charge the pack off the chair or run a custom cable.
• Alligator-clamp chargers — The VMAX BC2403A clamps on for a quick hookup in the garage, workshop, or storage closet.

VMAX 24V 3A chargers are compact, weigh under a pound, and accept 100–240V AC, so they travel easily and fit overnight charging at home. They are sized for 9–60Ah banks—the capacity range used on most travel scooters and mid-size power chairs. The Victron 8A charger adds IP65 weather resistance, recovery mode for a deeply discharged pack, storage mode for chairs that sit between appointments, and a five-year warranty.

Charge With Confidence and Get Back Out the Door

Caregivers and daily riders both need a charger they can trust without standing over it. Smart staging, float maintenance, and the right connector remove the guesswork. Pair a VMAX 3A maintainer with a standard AGM or gel bank for simple overnight care. Choose Victron when you have upgraded to lithium, want Bluetooth visibility, or need an 8-amp charge that gets a larger chair back in service faster.

Browse 24V mobility scooter and power chair chargers from VMAX and Victron, match the connector on your device, and start every trip on a full battery. Shop the collection now and give your mobility equipment the safe, complete charge it deserves.