Product Description
With 2500W RMS / 5000W Peak ratings and the ability to supply 2500 amps, the CT2500 is a proud addition to the VMAX Competition (CT) Series of AGM car audio batteries that were specifically designed for supplying large bursts of energy. The CT series combines industry-leading deep-cycle capabilities with our fastest charge and discharge rates, making them ideal for car audio and hydraulics applications, as well as any other applications where high-performance reliability is essential. Using our specially designed Absorbed Glass Matt (AGM) between the VMAX plates, adds to its many physical and electrical advantages that make it superior to the wet lead acid batteries. This also maximizes the VMAX resistance to shocks and vibrations.
Features:
- Sealed Construction
The unique construction and sealing techniques of VMAX tanks guarantee leak proof operation in any position with no adverse effect to capacity or service life. VMAX tanks are classified as non-spill able, non-hazardous, dry batteries making them NOT restricted for Surface, Maritime and Air Transport. - Electrolyte Suspension system
VMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte. No silica gels or any other contaminants are used. - Maintenance Free Operation
There is no need to check specific gravity of the electrolyte or add water to VMAXTANKS™ during float service life. In fact, there is no provision for this type of maintenance. - Heavy Duty Grids
Heavy duty lead tin alloy grids manufactured with virgin lead provide an extra margin of performance and service life in either float or cyclic applications, even after repeated discharges. - Low Self Discharge
The self-discharge rate of the new VMAX tanks at room temperature is approximately 1-2% of rated capacity per month (compared to 2-3% for most other AGM batteries and 15-20% for Lead Acid batteries). - Operating Temperature
VMAXTANKS™ may be operated over a broad range of ambient temperatures. - Ultra Low Resistance
VMAXTANKS™ Ultra Low Resistance make it up to 99% efficient (compared to 85-95% as in Lead Acid Batteries and 97% in most other GEL and AGM batteries). - Higher Power Density
A special assembly technology is used to enhance power density to a considerable level. - Reliable Construction
The extra strong construction ABS container reduces case bulging and plate warping, ensuring long life and high performance.
BCI Group* 31 (+ on L.H.S. & - on R.H.S)
* Matching is based on closest dimensional specifications.
Charging Options:
- AC Chargers: Any quality brand AGM smart & microprocessor controlled charger with the recommended specs below can be used
- Alternator: 14V-15V
- RV Converter: 14V-15V
- Solar Panel: 175W-450W
- Charge Controller: 20A-UP
Voltage | 12V |
Capacity | 125Ah |
Burst Amps | 2500A |
Terminal Posts | 8mm(included) |
Dimensions (L x W x H) |
13"x6.8"x8.7" |
Weight | 75 lbs |
Charging Current | 8-35A |
Charging Voltage | 14.4V - 14.9V |
Float Voltage | 13.5V - 13.8V |
Discharge Temp Range | -4°F - 140°F |
Charging Temp Range | 14°F - 140°F |
Storage Temp Range | -4°F - 140°F |